SUNDSTROM SR510 - P3 Particle Filter
Click Image to Enlarge
Product Code: SUNSR510
SUNDSTRÖM SR510 - P3 Particle Filter
Mechanical particle filter with exceptionally low breathing resistance for protection against all types of particles.
The SR 510, P3 R particle filter is designed for use in Sundström half masks, full face masks, and the SR 500 / SR 500 EX / SR 700 fan. The filter provides protection against all types of particulate pollutants.
The particle filter can easily be combined with gas filters from the Sundström filter range to provide protection also against gases and vapours, e.g. during spray painting. The particle filter should be combined with pre-filter SR 221, which will extend the life of the particle filter.
SUNDSTRÖM P3 FILTER FEATURES
- High-performance particle filter class P3. The filter flange features an O-ring that optimizes the seal to the front rim of Sundström gas filters.
- Used against all types of wet and dry particles, such as dust, smoke, aerosols, spray, asbestos, bacteria, viruses, and mould.
- Plastic polypropylene. No metal parts.
- The filter should be combined with pre-filter SR 221 to increase its useful life.
Specifications
| Specification | Details |
|---|---|
| Material | Plastic polypropylene. No metal parts. |
| Size | Largest diameter: 107 mm. Thickness: 31 mm. |
| Weight | 44 g |
| Filtration Paper | Particle filter contains about 1,300 sq cm (200 sq inches) hydrophobic fibreglass paper. |
| Filtration Efficiency | Paraffin oil aerosol: >99.997% (tested by INSPEC). |
| Pressure Drop | At 30 l/min: 40 Pa (standards requirement: <120 Pa). At 95 l/min: 120 Pa (standards requirement: <420 Pa). |
| Storage | Store at room temperature in a clean, dry place. If the seal has been broken, store away from contaminants in an airtight container. Shelf life is 10 years if the seal is unbroken. Expiry date printed on filter. |
| Standards/Approval | AS/NZS 1716:2012 |
Brand: SUNDSTROM
