AS/NZS 1715:2009 selection, use and maintenance of respiratory protective equipment states that the proper fitting of respiratory protective equipment requires the use of some type of fit test to determine and adequate match between the facepiece of the RPE and face of the wearer.
We are able to provide in house respirator fit testing in NSW, QLD, ACT and VIC or onsite respirator fit testing Australia wide. We use the Quantitative method using a TSI portacount respirator fit tester which eliminates the guesswork associated with qualitative fit test methods. Passing a Quantitative fit test proves that the respirator is sized correctly and the person is competent in donning the respirator.
Upon passing a fit test the person is issued with a fit test report and printed fit test card which states name, ID number, date of test, next test due, mask tested on and the overall fit factor.
We have a wide variety of respirators from disposable, half face and full face and can conduct a fit test using a respirator from all the leading brands. These include: Sundstrom, Scott Safety, 3M, Moldex, Honeywell, ProChoice and all brands of P2 disposables.
If you would like to book a respirator fit test please click the book now button below or give us a call on (02) 8072 4162 or email service@asbestosremovalproducts.com.au
We are able to provide certified testing of hazardous dust appliances through our sister company Assured Equipment Services which is also located on our premises. This testing and servicing is performed to ensure your equipment is operating at the required and maximum efficiency levels. We use Dispersed Oil Particulate (DOP) filter testing for appliances with a maximum allowed penetration of 0.005%. The test results are verified and recorded on an official Test Certificate that is provided to the customer as proof of testing. The test results are also logged against an appliances' serial number and kept on computerised file by Assured Equipment Services for customer reference purposes.
To find out more on DOP Testing and its importance please visit the Assured Equipment Services website.
We provide a range of services that can be customised to meet your needs. These include:
Please note that ALL appliances will need to be decontaminated in our wet room and visually inspected prior to DOP and Air Flow testing for health and safety purposes.
Once you have your machinery tested or serviced by Assured Equipment Services it will be entered into our customer database. Each service performed by us will be permanently recorded in our system. Information such as your service reports and test certificates will be available in the case that your originals become lost. Upon each service your machine will also be labelled with a Service Record sticker dating the machine's next service due date. We also provide all our customer's service reminders ensuring that your equipment remains safe and efficient for use at all times.
Allens Industrial Products are able to provide asbestos removal equipment for hire as an option for Asbestos Licensed Contractors only.
Available for hire are asbestos removal vacuums, negative pressure units, roving heads for NPU's, water management systems, pump out boxes and negative pressure monitors. This equipment is available for hire Australia wide, with pick-up and delivery options available.
Each machine is fully serviced and tested upon return through our state of the art enclosed environment workshop ensuring that each piece of equipment is then available for rehire in a safely operational state with a DOP test certificate ensuring 99.995% filtration efficiency.
Hiring is a great option for those license holders who require some extra equipment for larger projects where the purchase of a new machine may not be viable.
In the case that you are not able to drop your equipment into our premises directly, Allens Industrial Products are able to provide Australia wide transport of hazardous dust equipment and machinery through Chemcouriers Pty Ltd.
In order to arrange transport with Chemcouriers you will need to contact them via phone and book in a pick-up time.
If you do not wish to create your own account with Chemcouriers you are able to place your goods on our Allens Industrial Products account. Please note that we will then pass the freight costs on to you as part of our service. If you would like to obtain a prior quote for transportation on our Allens Industrial Products account you will need to contact us directly as Chemcouriers will not be able to provide this information to you unless you have your own account with Chemcouriers. Please note that only deliveries to our premises at 3 Metters Place, Wetherill Park, NSW 2164 will be accepted on this account.
For more information on Chemcouriers please download the file below:
Allens Industrial Products Sydney will be holding periodic equipment training sessions for groups of up to ten personnel. The things that our sessions will cover are:
To find out more about this service please Contact Us.