FIBERLOCK 5496-1-C4 - Lead Safe Cleaner

FIBERLOCK 5496-1-C4 - Lead Safe Cleaner
Click Image to Enlarge

Product Code: 5496-1-C4

$69.27 (inc GST)

In Stock

FIBERLOCK LeadSafe Cleaner

Following any lead abatement projects, construction, renovation that disturbs lead and creates dust, use LeadSafe Lead Dust Cleaner to assist in the cleanup. This product is formulated to remove more lead dust than ordinary cleaning products, by utilizing chelating agents similar to those given to individuals with lead poisoning. These chelating agents lift the lead from the surface, binding to the lead dust and hold it in suspension.

LeadSafe Lead Dust Cleaner is a concentrated product designed specifically to assist in the cleanup of lead dust after lead abatement projects, construction/renovations or any other activity which disturbs lead and creates dust. This product has been formulated to remove more lead dust than ordinary cleaning products. Dilution 4 Litres makes 75 Litres.


APPLICATION INFORMATION

DILUTION

Dilution 4 Litres makes 75 Litres.

CLEANING PROCEDURE

Clean and remove all belongings from the area to be cleaned. Prior to application use a H Class vacuum on all surfaces. Starting at the end farthest from the exit, vacuum the room towards the exit beginning at the top of each room and working down. When applying the cleaning solution start in a far corner working towards the exit of the room to avoid re-contamination of the cleaned areas. Always wear appropriate personal protective equipment (PPE) during any lead abatement or cleanup activity.

Three Bucket Cleaning System: By following this system you will minimize the risks of reintroducing lead back into the cleaned environment.

  • Bucket 1 Contains uncontaminated LeadSafe cleaner solution.
  • Bucket 2 This bucket is empty and will be used to hold all dirty water.
  • Bucket 3 Contains clean water for rinsing.

    1. Using a mop, rag or sponge dip into bucket #1 and begin cleaning surfaces until clean
    2. Ring out mop, rag or sponge into bucket #2 and return to bucket #1 for more cleaning solution.
    3. Use clean water from bucket #3 to rinse surfaces.
    4. Replace cleaning solution and rinse water when dirty.

    For tough to clean surfaces including porous surfaces use warm water when mixing the solution and allow the product to sit for 10 minutes prior to cleaning.

    Brand: FIBERLOCK

    Documents:

    Product Information Sheet (PDF)